product
Products
Home

Arista Compatible

Arista Networks® Compatible TAA 400GBase-ER8 400G ER8 40Km Optical Transceiver Module
Arista Networks® Compatible TAA 400GBase-ER8  400G ER8 40Km Optical Transceiver Module

Arista Networks® Compatible TAA 400GBase-ER8 400G ER8 40Km Optical Transceiver Module

 

SKU: QFP-LW31QG-ER8C-FSZ

 

Product Highlights

 

QSFP-DD MSA compliant

 

Compliant to IEEE 802.3bs 400GBASE-ER8

 

Digital diagnostic monitoring support

 

Hot pluggable 76 pin electrical interface

 

8 LAN-WDM lanes MUX/DEMUX design

 

53.125 Gbps PAM4 Channel Electrical Serial Interface (400GAUI-8)

 

Maximum power consumption 15.4 W

 

LC duplex connector

 

Supports 425 Gbps bit rate

 

Up to 40 km transmission on single mode fiber

 

Single 3.3 V power supply

 

RoHS 2 compliant

 

Operating case temperature:

 

Standard:  0 to +70°C


New Products

This Arista®  TAA 400GBase-ER8 compatible QSFP-DD transceiver provides 400GBase-ER8 throughput up to 40km over single-mode fiber (SMF) PAM4  via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Juniper Networks®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

 

Technical Specification

Compatible OEM Arista® Compatible With OEM Part Number(s) QFP-LW31QG-ER8C
Transceiver Type ER8 Reach 40km
Wavelength Multiply wave nm Form Type QSFP-DD
Speed Description 400-Gigabit Media SMF
Connector LC  Extinction Ratio >6dB
Average laneTX Power -0.6~+5.6dBm Receiver Sensitivity RS
 Applications

400GBASE-ER8 Ethernet

Telecom networking

Data Center Interconnect

Environment

Operating: 0 to70°C

Storage: -40°C to 85°C

 

 

 Compatibility

Arista network switches • Arista network routers
• Arista firewalls • Arista security gateway
• Arista fiber media converter • Arista network adapters
• Arista network interface card (NICs) • Arista NAS
 
 
 

Quality Assurance

 

 

Quality Certification

FIBERTOP has strict control over all products' quality, including our strict qualification audit for material suppliers, comprehensive quality management system and production process control which comply with the certifications and safety standard. Our products accord with industry standard and mainstream quality certification, such as  ISO 9001, CE, RoHS, CE, REACH, FCC, FDA, CB, UL etc.

 

  • Excellent quality is the foundation of FIBERTOP' s survival and development.
  • Our R&D team are experts with many years' experience in telecom industry.
  • Our manufacturers are first-class manufacturers in the industry.
  • Many of them have the qualification of OEM for first-class system equipment manufacturers.

 

 

 

                                                                    

 

 

FIBERTOP provide after-sales service in strict accordance with Chinese Consumer Protection Law & Product Quality Law of the People's Republic of China. The defects liability period is provided for each product based on the materials, workmanship, frequency of use and service life. The return, replacement and repair services are as follows:

 

 

Fs_warranty_cycle30.png

Return within 30 days

Fs_warranty_cycle01.png

Replacement up to 1 year

Fs_warranty_cycle05.png

Up to 5 years warranty

 
  • Warranty process

Provide relevant information (such as order number, product model, product serial number, product label, etc.)→Describe the problems you meet with →FIBERTOP confirms that the product is complete and still in the warranty period→Send the product back to FIBERTOP repair centre.

Note:The warranty period of the repair or replacement product is based on the longer time,either the remaining warranty period of the original product or ninety days after repair.

  • Request a repair 

When your FIBERTOP products need repairing(RMA-Return Material Authorization ) , please contact your sales consultant to provide timely service to you.

 

  • Free maintenance items

Guarantee repairing in two years : 1.Not man made damage; 2. Product quality issues caused by design defects or material problems.

 

  • The following conditions will not be repaired

• Maintenance center judge as a non FIBERTOP products;

The appearance of man-made damage;

End face damage caused by use;

Inapplicable items listed in the warranty statement.

 

  • Warranty description

FIBERTOP guarantees that all the products are subject to strict quality control from raw materials procurement to production process. According to the problems raised by customers. if it is confirmed that the defective product are caused by raw materials or production process, FIBERTOP will provide repair or replacement services for free ;

The warranty terms do not cover any damage to the product caused by improper installation, accidental disasters, natural disasters, abuse, misuse, inadequate or excessive power supply, incorrect operation, poor environmental conditions, and any unauthorized disassembly, repair or modification ;

The warranty also does not apply to second-hand or unauthorized resale of products;

The FIBERTOP warranty only guarantees that customers can enjoy repair and replacement services when they purchase defective or damaged products ; FIBERTOP is not obliged to compensate or assume responsibility for module damage and repair needs caused by other equipment in use.

The warranty does not cover problems caused by third-party software or connected related equipment,etc.

 

FIBERTOP always adheres to the concept of "focus, innovation and progress", and is committed to providing every user with reliable products and enthusiastic services.
     
     
   
     
     
    Net weight
0.5kg Gross Weight(with package) 0.6kg
   

 

 
Package of 1~50 pieces
  Step 1 Step 2  
  Step 3 Step 4  
       
Package of 51~200 pieces
  Step 1 Step 2  
  Step 3 Step 4  
       
Package of 201~400 pieces or more
  Step 1 Step 2  
  Step 3 Step 4  

 

 

DELIVERY METHOD

 

FIBERTOP has established long-term cooperation with major global logistics companies to provide distribution services to more than 200 countries and regions.

 

Receiving Region Logistics Type Timeliness
Hong Kong, Macao and Taiwan SF 1~2 days
FedEx IP 1~3 days
FedEx IE 4~6 days
DHL 2~5 days
Overseas Regions UPS 1~3 days
FedEx 1~3 days
DHL 2~5 days

 

 

Note: 1. Timeliness is the estimated delivery time, some remote areas delivery may be delayed, the specific delivery time shall prevail .

 

  2. If you need to specify a logistics company, please contact customer service staff or your sales representative.

 

 

 

 

 

FIBERTOP has 10+ years of R&D technology experience and more than 100 successful cases. With rich experience and R&D strength, we have a complete set of services from the core system design to the  compatibility design of SFP transceivers and the completion of the final product. We can definitely satisfy our customers' needs through providing customized high-performance products and solutions at the first time.

 

Product customization

 

 

Fs_label.svg

Label

Fs_colour.svg

Colour

Fs_model.svg

Model

Fs_length.svg

Length

Fs_function.svg

Function

 

 

 

 

 

 

Scheme Customization

 

 

 

Business

 

 

Rate

 

 

Distance

 

 

FIBERTOP focuses on customer-oriented solutions and provides technical support.

 

We can optimize the design based on your original solutions, and also provide you with a complete network solution ,related products and technical support.  

 

 

 

 

Arista® Compatible  400G  Transceivers

QFP-CTQG-ZRC  FIBERTOP 400G Coherent OSFP-DCO ZR+ 80KM C-Band Tunable Optical Transceiver Module
QFP-DCQG-ZRC
 FIBERTOP 400G ZR+ QSFP-DD Coherent DWDM DCO Optical Module Transceiver 120km

 

 

 

 

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • Arista Networks® Compatible TAA 400GBase-ER8  400G ER8 40Km Optical Transceiver Module
    Arista Networks® Compatible TAA 400GBase-ER8 400G ER8 40Km Optical Transceiver Module

      SKU: QFP-LW31QG-ER8C-FSZ   Product Highlights   QSFP-DD MSA compliant   Compliant to IEEE 802.3bs 400GBASE-ER8   Digital diagnostic monitoring support   Hot pluggable 76 pin electrical interface   8 LAN-WDM lanes MUX/DEMUX design   53.125 Gbps PAM4 Channel Electrical Serial Interface (400GAUI-8)   Maximum power consumption 15.4 W   LC duplex connector   Supports 425 Gbps bit rate   Up to 40 km transmission on single mode fiber   Single 3.3 V power supply   RoHS 2 compliant   Operating case temperature:   Standard:  0 to +70°C

Intellectual property, high-tech enterprise
Intellectual property, high-tech enterprise
Read More

Need Help? leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

products

whatsApp

contact