product
Products
Home

Ubiquiti Compatible

Ubiquiti® UF-RJ45-1G Compatible 10/100/1000BASE-T SFP Copper RJ-45 100m Transceiver Module
Ubiquiti® UF-RJ45-1G Compatible 10/100/1000BASE-T SFP Copper RJ-45 100m Transceiver Module
Ubiquiti® UF-RJ45-1G Compatible 10/100/1000BASE-T SFP Copper RJ-45 100m Transceiver Module

Ubiquiti® UF-RJ45-1G Compatible 10/100/1000BASE-T SFP Copper RJ-45 100m Transceiver Module

 

SKU: UF-RJ45-1G-FSZ

 

Product Highlights

 

Up to 1.25Gb/s bi-directional data links

 

Hot-pluggable SFP+ footprint

 

Extended case temperature range

 

Fully metallic enclosure for low EMI

 

Low power dissipation

 

Compact RJ-45 connector assembly

 

Access to physical layer IC via 2-wire serial bus

 

1000 BASE-T operation in host systems with SERDES interface

 

10/100/1000Mbps compliant in host systems with SGMII interface


New Products

 

This Ubiquiti® UF-RJ45-1G compatible SFP-GEx-Txx Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cables. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh. 

 

 

Technical Specification

Compatible OEM Ubiquiti® Compatible With OEM Part Number(s) S-RJ01
Transceiver Type TX Reach 100m
Wavelength N/A Form Type SFP
Speed Description 1-Gigabit Media Copper
Connector RJ-45  Extinction Ratio N/A
TX Power N/A Receiver Sensitivity N/A
 Applications

1.25 Gigabit Ethernet over Cat 5 cable

Environment

Operating:0 to70C

Storage: -40°C to 85°C

 Compatibility

• Ubiquiti network switches Ubiquiti network routers
 
 
 

Quality Assurance

 

 

Quality Certification

FIBERTOP has strict control over all products' quality, including strict qualification audit for material suppliers, comprehensive quality management system and production process control which comply with the certifications and safety standard. Our products accord with industry standard and mainstream quality certification, such as  ISO 9001, CE, RoHS, CE, REACH, FCC, FDA, CB, UL etc.

 

  • Excellent quality is the foundation of FIBERTOP' s survival and development.
  • Our R&D team are experts with rich  experience in telecom industry.
  • Our material suppliers are first-class manufacturers in the industry.
  • We have the qualification of OEM for first-class system equipment manufacturers.

 

 

 

                                                                    

 

 

FIBERTOP provides after-sales service in strict accordance with Chinese Consumer Protection Law & Product Quality Law of the People's Republic of China. The defects liability period is provided for each product based on the materials, workmanship, frequency of use and service life. The return, replacement and repair services are as follows:

 

 

Fs_warranty_cycle30.png

Return within 30 days

Fs_warranty_cycle01.png

 replacement up to 1 year

Fs_warranty_cycle05.png

Up to 5 years warranty

 
  • Warranty process

Provide relevant information(such as order number, product model, product serial number, product label, etc.)→Describe the problems you meet with→FIBERTOPSFP confirms that the product is complete and still in the warranty period→Send the product back to FIBERTOPSFP repair centre.

Note: The warranty peroid of the repair or replacement product is based on the longer time, either the remaining warranty period of the original product or ninety days after repair.

 

  • Request a Repair

When your FIBERTOP products need repairing (RMA-Return Material Authorization), please contact your sales consultant to provide timely service for you.

 

  • Free maintenance items

Guarantee repairing in two years:1. Not man made damage;  2. Product quality issues caused by design defects or material problems

 

  • The following conditions will not be repaired

• Maintenance center judge as non FIBERTOP products;

The appearance of man-made damage;

End face damage caused by use;

Inapplicable items listed in the warranty statement.

 

  • Warranty description

FIBERTOP guarantees that all products are subject to strict quality control from raw material procurement to production process. According to the problems raised by customers, if it is confirmed that the defective products are caused by raw materials or production process, FIBERTOP will provide repair or replacement services for free;

The warranty terms do not cover any damage to the product caused by improper installation, accidental disasters, natural disasters, abuse, misuse, inadequate or excessive power supply, incorrect operation, poor environmental conditions, and any unauthorized disassembly, repair or modification;

The warranty also does not apply to second-hand or unauthorized resale of products;

The FIBERTOP warranty only guarantees that customers can enjoy repair and replacement services when they purchase defective or damaged products; FIBERTOP is not obligated to compensate or assume responsibility for module damage and repair needs caused by other equipment in use.

The warranty does not cover problems caused by third-party software or connected related devices, etc.

FIBERTOP always adheres to the concept of "focus, innovation and progress", and is committed to providing every user with reliable products and enthusiastic services.
     
     
   
     
     
    Net Weight
0.023kg Gross Weight (with package) 0.32kg
   

 

 
 
Package of 1~50 pieces
  Step 1 Step 2  
  Step 3 Step 4  
       
Package of 51~200 pieces
  Step 1 Step 2  
  Step 3 Step 4  
       
Package of 201~400 pieces or more
  Step 1 Step 2  
  Step 3 Step 4  

 

 

DELIVERY METHOD

 

FIBERTOP has established long-term cooperation with major global logistics companies to provide distribution services to more than 200 countries and regions.

 

Receiving Region Logistics Type Timeliness
Hong Kong, Macao and Taiwan SF 1~2 days
FedEx IP 1~3 days
FedEx IE 4~6 days
DHL 2~5 days
Overseas Regions UPS 1~3 days
FedEx 1~3 days
DHL 2~5 days

 

 

Note: 1. Timeliness is the estimated delivery time, some remote areas delivery may be delayed, the specific delivery time shall prevail;

 

  2. If you need to specify a logistics company, please contact  customer service staff or your sales representative.

 

 

 

 

 

FIBERTOP has 10+ years of R&D technology experience and more than 100 successful cases. With rich experience and R&D strength, we have a complete set of  services from the core system design to the compatibility design of SFP transceivers and  the completion of the final product,  we  can definitely satisfy our customers' needs through providing  customized high-performance products and solutions at the first time.

 

Product customization

 

 

Fs_label.svg

Label

Fs_colour.svg

Colour

Fs_model.svg

Model

Fs_length.svg

Length

Fs_function.svg

Function

 

 

 

 

 

 

Scheme Customization

 

 

 

Business

 

 

Rate

 

 

Distance

 

 

FIBERTOP focuses on customer-oriented solutions and provides technical support.

 

We can optimize the design based on your original solution, and also provide you with a complete network  solution, related products and technical support.

 

 

 

 

Ubiquiti® Compatible SFP/SFP+ Copper RJ-45 Transceivers

UF-RJ45-1G 10/100/1000BASE-T SFP Transceiver Copper RJ-45 100m DOM 0-70℃/-40-85℃
UF-RJ45-10G 10BASE-T SFP+ Transceiver Copper RJ-45 30m DOM 0-70℃/-40-85℃

 

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
  • Ubiquiti® UF-RJ45-1G Compatible 10/100/1000BASE-T SFP Copper RJ-45 100m Transceiver Module
    Ubiquiti® UF-RJ45-1G Compatible 10/100/1000BASE-T SFP Copper RJ-45 100m Transceiver Module

      SKU: UF-RJ45-1G-FSZ   Product Highlights   Up to 1.25Gb/s bi-directional data links   Hot-pluggable SFP+ footprint   Extended case temperature range   Fully metallic enclosure for low EMI   Low power dissipation   Compact RJ-45 connector assembly   Access to physical layer IC via 2-wire serial bus   1000 BASE-T operation in host systems with SERDES interface   10/100/1000Mbps compliant in host systems with SGMII interface

Intellectual property, high-tech enterprise
Intellectual property, high-tech enterprise
Read More

Need Help? leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

products

whatsApp

contact