Brocade Compatible

Brocade® XBR-000192 Compatible 16G Fibre Channel SFP+ 850nm 100m DDM LC MMF Transceiver Module
Brocade® XBR-000192 Compatible 16G Fibre Channel SFP+ 850nm 100m DDM LC MMF Transceiver Module
Brocade® XBR-000192 Compatible 16G Fibre Channel SFP+ 850nm 100m DDM LC MMF Transceiver Module

Brocade® XBR-000192 Compatible 16G Fibre Channel SFP+ 850nm 100m DDM LC MMF Transceiver Module


SKU: XBR-000192-FSZ


Product Highlights


Supports up to 14.025Gbps bit rates


Hot-pluggable SFP+ footprint


850nm VCSEL laser and PIN photodiode 


Up to 100m for OM3-MMF transmission, 35m on 50/125μm OM2-MMF


Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle, compatible with RoHS


Single +3.3V power supply


Real Time Digital Diagnostic Monitoring

New Products


Brocade® XBR-000192 Compatible part is a small form factor pluggable SFP+ shortwave transceiver for 16G Fibre Channel (16GFC) applications. It supports links up to 100m over OM3 multimode fiber. This module features a highly reliable 850nm VCSEL transmitter and PIN photo-detector into a duplex LC optical connector. It is a multi-rated 850nm optical transceiver that supports 14.025/8.5/4.25G Fibre Channel specifications. It complies with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) SFF-8431 Rev. 4.1 and SFF-8472 Rev. 11.0.  It has been programmed to ensure works with Cisco 16G SAN switches, routers, network interface cards (NICs) and other storage networking equipment.



Technical Specification

Compatible OEM Brocade Compatible With OEM Part Number(s) XBR-000192
Transceiver Type SR Reach 100m
Wavelength 850nm Form Type SFP+
Speed Description 14.025 Gb/s Media SMF
Connector LC Duplex  Extinction Ratio >3.0 dB
TX Power -7.8~-0.5 dBm Receiver Sensitivity <-10.5 dBm

High-speed storage area networks

Switches and hubs

Network interface cards

Mass storage systems

Host bus adapters

Tri-Rate 4G/8G/16G Fibre



Operating: 0 to70°C

Storage: -40°C to 85°C



• Brocade network switches • Brocade network routers
Brocade firewalls • Brocade security gateway
• Brocade fiber media converter • Brocade network adapters
• Brocade network interface card (NICs) • Brocade NAS


Quality Assurance



Quality Certification

Fibertop has strict control over all products' quality our products, including our strict qualification audit for material suppliers, comprehensive quality management system and production process control which comply with the certifications and safety standard. Our products accord with industry standard and mainstream quality certification, such as  ISO 9001, CE, RoHS, CE, REACH, FCC, FDA, CB, UL etc.


  • Excellent quality is the foundation of FIBERTOPSFP' s survival and development.
  • Our R&D team are experts with rich experience in telecom industry.
  • Our material suppliers are first-class manufacturers in the industry.
  • We have the qualification of OEM for first-class system equipment manufacturers.






Fibertop provide after-sales service in strict accordance with Chinese Consumer Protection Law & Product Quality Law of the People's Republic of China. The defects liability period is provided for each product based on the materials, workmanship, frequency of use and service life. The return, replacement and repair services are as follows:




Return within 30 days


Replacement up to 1 year


Up to 5 years warranty

  • Warranty process

Provide relevant information (such as order number, product model, product serial number, product label, etc.)→Describe the problems you meet with →Fibertop confirms that the product is complete and still in the warranty period→Send the product back to Fibertop repair centre.

Note:The warranty period of the repair or replacement product is based on the longer time,either the remaining warranty period of the original product or ninety days after repair.

  • Request a repair 

When your Fibertop products need repairing(RMA-Return Material Authorization ) , please contact your sales consultant to provide timely service to you.


  • Free maintenance items

Guarantee repairing in two years : 1.Not man made damage 2. Product quality issues caused by design defects or material problems.


  • The following conditions will not be repaired

• Maintenance center judge as a non Fibertop products;

The appearance of man-made damage;

End face damage caused by use;

Inapplicable items listed in the warranty statement.


  • Warranty description

Fibertop guarantees that all the products are subject to strict quality control from raw materials procurement to production process. According to the problems raised by customers. if it is confirmed that the defective product are caused by raw materials or production process, Fibertop will provide repair or replacement services for free ;

The warranty terms do not cover any damage to the product caused by improper installation, accidental disasters, natural disasters, abuse, misuse, inadequate or excessive power supply, incorrect operation, poor environmental conditions, and any unauthorized disassembly, repair or modification ;

The warranty also does not apply to second-hand or unauthorized resale of products;

The Fibertop warranty only guarantees that customers can enjoy repair and replacement services when they purchase defective or damaged products ; Fibertop is not obliged to compensate or assume responsibility for module damage and repair needs caused by other equipment in use.

The warranty does not cover problems caused by third-party software or connected related equipment,etc.


Fibertop always adheres to the concept of "focus, innovation and progress", and is committed to providing every user with reliable products and enthusiastic services.
    Net Weight
0.019kg Gross Weight(with package) 0.32kg


Package of 1~50 pieces
  Step 1 Step 2  
  Step 3 Step 4  
Package of 51~200 pieces
  Step 1 Step 2  
  Step 3 Step 4  
Package of 201~400 pieces or more
  Step 1 Step 2  
  Step 3 Step 4  





Fibertop has established long-term cooperation with major global logistics companies to provide distribution services to more than 200 countries and regions.


Receiving Region Logistics Type Timeliness
Hong Kong, Macao and Taiwan SF 1~2 days
FedEx IP 1~3 days
FedEx IE 4~6 days
DHL 2~5 days
Overseas Regions UPS 1~3 days
FedEx 1~3 days
DHL 2~5 days



Note: 1. Timeliness is the estimated delivery time, some remote areas delivery may be delayed, the specific delivery time shall prevail.


  2. If you need to specify the logistics company, please contact customer service staff or your sales representative.





Fibertop has 10+ years of R&D technology experience and more than 100 successful cases. With rich experience and R&D strength, we have a complete set of services from the core system design to the  compatibility design of SFP transceivers and the completion of the final product. We can definitely satisfy our customers' needs through providing customized high-performance products and solutions at the first time.


Product customization



















Scheme Customization













Fibertop focuses on customer-oriented solutions and provides technical support.


We can optimize the design based on your original solutions, and also provide you with a complete network solution ,related products and technical support.  





Brocade Compatible 16G SFP+ Fibre Channel 100m~10km Transceivers

XBR-000192 850nm, 14.025Gbps, LC Duplex, 100m OM3, 0°C~+70°C
XBR-000192 850nm, 14.025Gbps, LC Duplex, 100m OM3, -45°C~+85°C
SFP-16GBPS-LWL  1310nm, 14.025Gbps, LC Duplex, 10km, 0°C~+70°C
1310nm, 14.025Gbps, LC Duplex, 10km, -45°C~+85°C





leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Intellectual property, high-tech enterprise
Read More

Need Help? leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.