2.5G Juniper Compatible

Juniper® SFP-1OC48-LR OC-48 /STM-16 Compatible 2.5G ZX SFP Transceiver SMF 1550nm 80km LC DOM
Juniper® SFP-1OC48-LR OC-48 /STM-16 Compatible 2.5G ZX SFP Transceiver SMF 1550nm 80km LC DOM
Juniper® SFP-1OC48-LR OC-48 /STM-16 Compatible 2.5G ZX SFP Transceiver SMF 1550nm 80km LC DOM

Juniper® SFP-1OC48-LR OC-48 /STM-16 Compatible 2.5G ZX SFP Transceiver SMF 1550nm 80km LC DOM




Product Highlights


Support for 2.5Gbps data rate


Hot-pluggable SFP footprint


DFB laser and PIN photo detector, up to 80km for SMF transmission


Compliant with SFP MSA and SFF-8472 with duplex LC receptacle


Compatible with RoHS


Single +3.3V power supply


Real Time Digital Diagnostic Monitoring

New Products

 This is a high-performance small form factor pluggable SFP single mode transceiver for 2.488Gbps SONET OC-48 and SDH STM-16 long reach (LR-2) application. It fully complies with the SFP Multi-Sourcing Agreement (MSA) and can be used on the MSA compliant networking equipment. The 2.5Gbps SFP transceiver consists of the below sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1550nm DFB laser and the APD photo-detector. The SFP transceiver module is a Class 1 laser product complies with FDA/CDRH and IEC-60825 standards.

This transceiver is programmed and tested to be compatible with Juniper networking equipment for SONET/SDH (POS), optical networking and ATM applications. It is an ideal equivalent to Juniper SFP-1OC48-LR OC-48/STM-16 single mode long reach (LR-2) SFP optical module at a much lower price, which provides a reliable compatible SFP optics solution for system integrator, distributors and end users in data network infrastructure and fiber cabling.



Technical Specification

Compatible OEM Juniper® Compatible With OEM Part Number(s) SFP-1OC48-LR
Transceiver Type ZX  Reach 80km
Wavelength 1550nm Form Type SFP
Speed Description 2.5-Gigabit Media SMF
Connector LC  Extinction Ratio >8.2dB
TX Power 0~5dBm Receiver Sensitivity <-26dBm

2.5Gbps Optical systems

Fiber Channel 

Other Optical links


Operating:0°C to 70°C

Storage: -40°C to 85°C



Juniper  network switches • Juniper  network routers
•  Juniper  firewalls
• Juniper  security gateway
• Juniper  fiber media converter • Juniper  network adapters
• Juniper  network interface card (NICs)
• Juniper  NAS

Quality Assurance



Quality Certification

FIBERTOP has strict control over all products' quality, including strict qualification audit for material suppliers, comprehensive quality management system and production process control which comply with the certifications and safety standard. Our products accord with industry standard and mainstream quality certification, such as  ISO 9001, CE, RoHS, CE, REACH, FCC, FDA, CB, UL etc.


  • Excellent quality is the foundation of FIBERTOP' s survival and development.
  • Our R&D team are experts with rich  experience in telecom industry.
  • Our material suppliers are first-class manufacturers in the industry.
  • We have the qualification of OEM for first-class system equipment manufacturers.







FIBERTOP provides after-sales service in strict accordance with Chinese Consumer Protection Law & Product Quality Law of the People's Republic of China. The defects liability period is provided for each product based on the materials, workmanship, frequency of use and service life. The return, replacement and repair services are as follows:




Return within 30 days


 replacement up to 1 year


Up to 5 years warranty

  • Warranty process

Provide relevant information(such as order number, product model, product serial number, product label, etc.)→Describe the problems you meet with→FIBERTOPSFP confirms that the product is complete and still in the warranty period→Send the product back to FIBERTOPSFP repair centre.

Note: The warranty peroid of the repair or replacement product is based on the longer time, either the remaining warranty period of the original product or ninety days after repair.


  • Request a Repair

When your FIBERTOP products need repairing (RMA-Return Material Authorization), please contact your sales consultant to provide timely service for you.


  • Free maintenance items

Guarantee repairing in two years:1. Not man made damage;  2. Product quality issues caused by design defects or material problems


  • The following conditions will not be repaired

• Maintenance center judge as non FIBERTOP products;

The appearance of man-made damage;

End face damage caused by use;

Inapplicable items listed in the warranty statement.


  • Warranty description

FIBERTOP guarantees that all products are subject to strict quality control from raw material procurement to production process. According to the problems raised by customers, if it is confirmed that the defective products are caused by raw materials or production process, FIBERTOP will provide repair or replacement services for free;

The warranty terms do not cover any damage to the product caused by improper installation, accidental disasters, natural disasters, abuse, misuse, inadequate or excessive power supply, incorrect operation, poor environmental conditions, and any unauthorized disassembly, repair or modification;

The warranty also does not apply to second-hand or unauthorized resale of products;

The FIBERTOP warranty only guarantees that customers can enjoy repair and replacement services when they purchase defective or damaged products; FIBERTOP is not obligated to compensate or assume responsibility for module damage and repair needs caused by other equipment in use.

The warranty does not cover problems caused by third-party software or connected related devices, etc.

FIBERTOP always adheres to the concept of "focus, innovation and progress", and is committed to providing every user with reliable products and enthusiastic services.
    Net Weight
0.02kg Gross Weight (with package) 0.32kg


Package of 1~50 pieces
  Step 1 Step 2  
  Step 3 Step 4  
Package of 51~200 pieces
  Step 1 Step 2  
  Step 3 Step 4  
Package of 201~400 pieces or more
  Step 1 Step 2  
  Step 3 Step 4  





FIBERTOP has established long-term cooperation with major global logistics companies to provide distribution services to more than 200 countries and regions.


Receiving Region Logistics Type Timeliness
Hong Kong, Macao and Taiwan SF 1~2 days
FedEx IP 1~3 days
FedEx IE 4~6 days
DHL 2~5 days
Overseas Regions UPS 1~3 days
FedEx 1~3 days
DHL 2~5 days



Note: 1. Timeliness is the estimated delivery time, some remote areas delivery may be delayed, the specific delivery time shall prevail;


  2. If you need to specify a logistics company, please contact  customer service staff or your sales representative.






FIBERTOP has 10+ years of R&D technology experience and more than 100 successful cases. With rich experience and R&D strength, we have a complete set of  services from the core system design to the compatibility design of SFP transceivers and  the completion of the final product,  we  can definitely satisfy our customers' needs through providing  customized high-performance products and solutions at the first time.


Product customization



















Scheme Customization













FIBERTOP focuses on customer-oriented solutions and provides technical support.


We can optimize the design based on your original solution, and also provide you with a complete network  solution, related products and technical support.





Juniper® Compatible 2.5G SFP 2km~80km Transceivers

SFP-1OC48-SR 2.5G SFP Transceiver SMF 1310nm 2km LC DOM 0-70°C
SFP-1OC48-IR  2.5G SFP Transceiver SMF 1310nm 20km LC DOM 0-70°C
SFP-1OC48-LR 2.5G SFP Transceiver SMF 1550nm 80km LC DOM 0-70°C





leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Intellectual property, high-tech enterprise
Intellectual property, high-tech enterprise
Read More

Need Help? leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.